Good floors start
with clear answers.
Laminate, hybrid or engineered timber? Understand the surface you walk on, what sits underneath, and which floor makes sense for your home.
A hard-wearing decorative surface
A wood-fibre core, a printed design and a protective wear surface. Often a strong choice for value and everyday wear.
A practical rigid vinyl floor
A printed floor with a rigid composite core. Often chosen for spill resistance and easy care, subject to the particular product and site.
The character of real wood
A genuine timber face bonded to a supporting core. The premium choice when natural grain, texture and timber character matter most.
Three constructions.
Different strengths.
| What matters | Laminate | Hybrid | Engineered timber |
|---|---|---|---|
| The visible surface | Printed design with a hard protective overlay | Printed design with a vinyl wear layer and coating | A real timber face, with a protective finish |
| The core | Usually high-density wood-fibre board (HDF) | Usually a rigid mineral/polymer composite; composite constructions vary | Plywood, cross-oriented softwood, HDF or another specified support |
| Everyday wear | Check AC abrasion rating and separate scratch/impact performance | Check wear layer, coating, indentation and use classification | Depends on species, coating and care; natural timber can dent and scratch |
| Water claims | Product-specific surface and joint protection; timed claims have conditions | Waterproof board material may be offered; installed-system protection varies | Usually moisture-sensitive; some ranges add specific surface protection |
| Subfloor | Must meet the selected product’s flatness, dryness and stability requirements | Must meet the selected product’s flatness, dryness and stability requirements | Must meet the product’s requirements and the floating or glue-down system |
| Renewal | Cannot be sanded into a new surface | Cannot be sanded into a new surface | May be refinishable, depending on remaining timber thickness and construction |
Independent construction reference: Australasian Timber Flooring Association (ATFA): flooring types and installation systems. These are category comparisons; each range Artemis offers has its own specifications.
What is beneath the board
still matters.
A hybrid plank can be made from materials that do not swell like wood fibre when wet. That does not make the building beneath it waterproof, or make a leaking appliance harmless.
Water may enter at room edges, penetrations or damaged joints, or already be present in the slab or timber substrate. Moisture trapped beneath a covering can still affect the structure and surrounding materials.
Surface and joint protection vary between products. We check the chosen range’s water claim, joint design, installation conditions and exclusions. A claim about the floor surface does not make the subfloor or building waterproof.
Wonderwood hybrid installation, moisture and care requirements
The board: a water-stable rigid core can resist swelling. Check which layers and conditions the manufacturer’s claim actually covers.
Illustrative assembly. Underlay and moisture control depend on the product and substrate.
Is hybrid suitable for a bathroom, laundry or a flood-prone room?
Only where the specific product and installation system expressly permit the application. A waterproof-material claim does not authorise every wet area or replace a required waterproofing system. Persistent damp, flooding and unresolved leaks need their own solution before flooring is selected.
Does a moisture barrier fix a wet subfloor?
No. A correctly specified moisture-control layer can form part of a floor assembly. It does not repair a leak, remove trapped moisture or correct ventilation. Timber subfloors need particular care: an impermeable covering or membrane can trap moisture. The assessment must consider the whole structure.
ATFA technical discussion of moisture beneath floor coverings
A hard surface.
A rating with a specific job.
What do AC4 and AC5 mean?
AC is an abrasion classification: resistance to wear from rubbing under a specified test. AC5 is a higher abrasion class than AC4. It is useful when comparing laminate wear performance, but is not a combined score for scratches, dents, slip resistance or water protection.
Do not compare a laminate AC rating directly with a hybrid wear-layer thickness. They describe different things. No household floor is scratch-proof; grit, dragging furniture and sharp impacts still matter.
Examples in the Artemis range: Casita AC4 product data · Wonderwood Hydromate Plus AC5 product data. The rating is one part of each product’s specification.
Is laminate harder than hybrid?
Laminate commonly has a hard resin wear surface, while hybrid uses a vinyl wear layer and coating. Some laminates perform very well against scratches and everyday scuffs. Actual performance depends on the particular products and the test used; a harder surface does not automatically mean better resistance to every type of damage.
Is laminate more forgiving of an uneven subfloor?
A substantial laminate board may feel more rigid, but thickness is not permission to bridge hollows or high spots. We check the actual product’s flatness tolerance. Wonderwood’s laminate and hybrid guides both require a flat, dry, clean and sound substrate and describe a 2 mm tolerance under a 1 m straightedge.
Underlay is not a levelling compound. Excessive deflection can strain click joints, create movement and noise, and shorten floor life.
Wonderwood laminate installation guide · Wonderwood hybrid installation guide
Where it can be
the right fit.
Hybrid is worth considering for busy indoor living areas where everyday spills, easy cleaning and a timber-look finish are priorities. It can suit kitchens and connected living areas when the chosen range permits them and the site meets its requirements.
Dry, sound and flat
Start with a suitable substrate. Correct moisture problems, loose sheets, high spots and excessive hollows before installation.
Heat and movement count
Assess strong sun, large windows, temperature extremes, expansion gaps and heavy fixed cabinetry. Use the range’s actual installation limits.
Use the specified underlay
Many hybrids have an attached backing. Do not automatically add the same underlay used beneath laminate; extra cushioning can be unsuitable.
Wonderwood hybrid site and care conditions. Confirm the backing and underlay arrangement for the specific range before installation.
Real wood on top.
Engineering underneath.
The premium appeal is the real timber surface: natural grain, colour variation and texture, with each board having its own character. The face is timber, rather than a printed wood image.
In a common plywood construction, that face is bonded to layers whose grain alternates direction. Wood moves more across its grain than along it; crossing the supporting layers helps restrain movement and improves dimensional stability compared with a similar solid board.
Construction varies. Some ranges use cross-oriented softwood layers; others use HDF or different cores. We check the actual product instead of assuming every engineered board is made the same way.
ATFA Timber Floors magazine, issue 62, pages 46–47: engineered-board construction · ATFA: engineered flooring definitions and installation methods
Bonded layers, alternating grain
Diagram illustrates a cross-laminated plywood core. Adhesive bonds the layers. Layer counts, species, grain directions and thicknesses depend on the range; diagram is not to scale.
Does engineered timber still move, dent or react to water?
Yes. The construction improves stability; it does not remove the properties of real wood. Humidity, leaks, standing water and poor installation can still cause damage. Species hardness and the coating affect everyday marks. Follow the range’s care and environmental conditions.
Can it be sanded and refinished?
Sometimes. The timber remaining above the joint, the wear-layer thickness, previous sanding, surface treatment and installation all matter. Thin veneer products may not be suitable for sanding. Ask for the actual wear-layer specification and a professional assessment; total board thickness alone does not answer this.
ATFA: wear-layer thickness and future sanding considerations, page 47
Is engineered timber always glued down?
No. Some products are designed for floating installation, some for direct adhesive fixing, and some permit either with conditions. The joint type, board dimensions, substrate and acoustic requirements determine the appropriate system.
Look beneath the existing floor.
An existing covering can hide unevenness, moisture damage, adhesive or loose substrate. Removing it may be necessary before we can confirm the preparation required and its price.
The number and timing of visits depend on your job, access and other trades. If extra subfloor work is needed, its scope, price and effect on timing should be agreed before it proceeds. Installation should also allow the product’s specified storage and acclimatisation conditions.
We recommend the product and installation system after considering the room, substrate, moisture conditions and your priorities.
Discuss your floor with ArtemisArtemis Flooring · Research checked 20 October 2026 · General guidance: the selected product’s current installation instructions and warranty define its specific conditions. This guide does not specify a waterproofing or moisture-remediation system.